Data Center and CloudGetting Started with Cisco Intercloud Fabric and Hybrid Cloud 

Data Center and CloudGetting Started with Cisco Intercloud Fabric and Hybrid Cloud 
John McDonough
February 6, 2015 at 2:53 pm PST

Comment 0

When I hear “hybrid” I think about cars. Those gas and electric cars that can switch to whichever power source is needed when it is needed the most or makes the most economical sense. The switch is, or at least should not be noticeable. Having been in a hybrid car I’ve experienced the switchover, the interesting thing is that the car itself does not change. The controls are the same; the car steers and moves that same way it did before. I don’t have to learn anything new or make some changes to the way I drive to continue to use the car.

That’s the way hybrid cloud should be, whether I’m using the private cloud in my enterprise or I’m using IT managed provider clouds. If the workload is completely in the provider cloud, split between the provider cloud and private cloud or completely in the private cloud, it really should make no difference to the workload… or me.

How true are those scenarios though? As soon as part of the workload is in the provider cloud things need to change. Application admins and network admins surely have already been enlisted to figure out how the workload applications can function in the provider cloud and still interact with the private cloud. What services does the workload need? How does workload security work? How does workload routing work? How does the hybrid cloud environment impact the workload? How many different cloud provider APIs will need to be leafed? These are only a few of the considerations there can be many more.

But what if you could put some or all of your workload in the provider cloud and not have to change anything? What if the layer 2 network could be extended into the provider cloud? What if the IP addressing of the workload could remain the same? What if the security of the workload could be maintained? What if workloads on different cloud providers could be managed in a homogeneous fashion? What if there was an API for automation of workload lifecycle?

All those “What ifs” are answered with Cisco IntercloudFabric

Intercloud Fabric Core Services

The Intercloud Fabric installation documentation and videos go a long way to get you started, however I wanted to provide a bit more information to help you prepare for Intercloud Fabric installation, configuration and connection to either Amazon AWS or Microsoft Azure or both.

First you’ll need an account at the cloud provider; the account needs and capabilities are different for each provider.

AWSStandard AWS accountAccount Policy requirementsFull EC2 Access PolicyFull S3 Access Policy – if you are going to deploy Windows imagesFull AWS Marketplace – if you are going to deploy Intercloud Fabric RouterTo deploy the Intercloud Fabric Router (AKA Cisco CRS100V in AWS Market place) you will need to accept the terms for the image. The CSR image to search for in AWS Marketplace is “Cisco Cloud Services Router: CSR 1000V – Bring Your Own License (BYOL)”AzureStandard Azure AccountIntercloud Fabric Router is not yet deployable in AzureIntercloud Fabric Firewall is not yet deployable in Azure

Download the attached presentation for a step-by-step guide to getting an AWS or Azure account. Cisco Intercloud Fabric – Cloud Access Keys

The Intercloud Fabric Release Notes detail all the physical and virtual hardware requirements. You will also find the details for which Guest OS versions are supported and any other of the latest caveats related to Intercloud Fabric.

Currently Cisco Intercloud Fabric infrastructure runs on VMware vSphere 5.1 (including update 1) and 5.5, an Enterprise Plus license is not needed. The infrastructure is comprised of three virtual appliances

Intercloud Fabric Director (ICFD)Prime Network Services Controller (PNSC)Cloud Virtual Supervisor Module (cVSM)

vCenter is required even if you are deploying on a single ESX host. Intercloud Fabric needs to connect to a vCenter environment.

From a networking perspective you’ll need some IP addresses, management IP address and IP address for the networks that will be extended to the provider cloud. For the ICF Infrastructure the IP requirement is

ICFD – 1PNSC – 1cVSM – 1

Each connection from ICFD to a provider cloud requires the deployment of an Intercloud Extender (ICX) this is a VM that will reside in the VMware environment and an Intercloud Fabric Switch (ICS) this is a VM that will be deployed in the provider cloud. These two VMs create the secure tunnel over which layer 2 networking is extended. The ICX/ICS pair (the IcfCloud) can be provisioned as single VM instances at each end of the layer 2 extension or in an HA mode where there is a primary and secondary VM instance of the ICX in the enterprise cloud and a primary and secondary VM instance of the ICS in the provider cloud.

For IcfCloud connections the IP requirement is

ICX – 1 in standalone mode or 2 in HA modeICS – 1 in standalone mode or 2 in HA mode

There are two network services that can be deployed in Amazon AWS, the Intercloud Fabric Router and the Intercloud Fabric Firewall. The Intercloud Fabric Router is the Cisco CSR1000V and the Intercloud Fabric Firewall is the Cisco Virtual Services Gateway. In the Intercloud Fabric documentation you will see the acronyms CSR and VSG respectively. As the documentation and messaging for Intercloud Fabric evolves there will be standardization on the ICF router and ICF firewall acronyms.

ICF router – 21 for management interface1 for sub-management interfaceICF firewall – 1

Minimal management IP address requirement for AWS deployment is 8

Minimal management IP address requirement for Azure deployment is 5

With the accounts setup and the requirements known, you’re ready to get started and experience all the benefits of hybrid cloud without the hassle.

Once you’ve absorbed all you need to know about Cisco Intercloud Fabric, try it. A 60-day license is available, the license allows Intercloud Fabric the ability to connect to Amazon AWS and Microsoft Azure. Additionally the license allows for deployment of the Intercloud Fabric Router and the Intercloud Fabric Firewall.

Leave a Reply

We encourage a lively discussion and request that you please comment using an authentic name. Spam, promotional and derogatory comments will not be approved. Comments will appear on the live site as soon as they are approved by the moderator (within 24 hours).


Email (will not be published) 

Website (please include “http://”)


Return to Countries/RegionsReturn to HomeAll Data Center and CloudAll SecurityReturn to HomeMobile ViewStandard View


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s